Fenton (636) 600-1801 | O'Fallon (636) 294-9005 | Union (636) 583-5627 | Cuba (573) 885-0283 | Mountain View (417) 934.2048 | Independence (816) 886-0622

Job Listings

  • Machine Operator and Processing
    A packaging machine operator is responsible for the safe operation of various pack machines and quality control equipment. Responsibilities include the setup, operation, and troubleshooting of equipment to comply with company safety guidelines, good manufacturing practices, and productivity standards.
  • Machine Operator - Lee's Summit
    The Machine Operator will be responsible for performing various tasks to set up, operate, monitor, troubleshoot and perform preventive maintenance on assigned machines. All 3 shifts available, $13-$15.
  • Processing Operator - Lee's Summit
    Process Operators oversee and manage the full production process of a manufacturing plant or other industrial facility. They monitor equipment to ensure the quality, efficiency and safety of the plant. They are also responsible for the safe operation, basic maintenance, and troubleshooting of the facility’s equipment and instruments. Process Operators are skilled professionals who often work as part of a team and provide leadership. All shifts available, $13-$15.
  • Assembly-North Kansas City
    Several factory workers needed immediately for all 3 shifts. Temp to Perm with good attendance and productivity. $12.00 AND UP TO START 40 PLUS HOURS PER WEEK NO EXPERIENCE NECESSARY Need reliable transportation and valid ID
  • Finish Cooler line
    Finish Cooler line: Puts on door decals, gaskets, extra shelves, cleans the glass on the doors, cleans the inside of the machines and the shelves, does hypot etech and other programming. 2nd Shift 4:30 - 3:00 am 1st Shift is $12.00/hr and 2nd Shift is $12.45/hr
  • Back Cooler line
    Doors, lights, installs drain pans, programs ems, puts headers in. 1st shift is 6am-4:30pm and 2nd Shift 4:30pm-3:00am 1st Shift is $12/hr and 2nd Shift is $12.45/hr
  • Masking
    Masking/Taping off the machines with paper to prepare for paint. Also decal area. 1st Shift is $12.00/hr and 2nd Shift is $12.45/hr
  • Sanding/Bondo
    Sanding/Bondo: Bonding the machine and sanding it to smooth out rough spots and prepare it for masking and paint. (Requires a mask/respirator) Must be clean shaven and must be able to pass a respirator test given by the HR department. 1st Shift is $12.00/hr and 2nd Shift is $12.45/hr
  • Cooler Metal Line
    Cooler Metal Line: Metal fabrication of the machines. Fixing the metal on the coolers. Removing and installing the pods on the coolers. 1st Shift is $12.00/hr and 2nd Shift is $12.45/hr
  • Thermal Imaging
    Thermal Imaging: Test compressor, change cords 1st Shift is $12.00/hr and 2nd Shift is $12.45/hr
  • Painter - Cuba, MO
    Personnel are to rack, prep, and spray all primers, in accordance with instructions given by the Paint/Shipping Supervisor or under direct supervision by a qualified trainer.
  • Masker - Cuba, MO
    Perform racking and masking duties using paper/tape, or liquid masking techniques to meet production requirements under the direct supervision of the Masking Supervisor, Masking Lead, or a qualified trainer.
  • Lab Tech - Cuba
    This is an entry-level position in which you will learn and be responsible for performing laboratory testing on a daily basis including, but not limited to, pH, TDS, Chrome, Settleable Solids testing, etc.; acquiring data via pH, TDS, Temperature, and Colorimeter meters, as well as other laboratory duties in accordance with instructions given by the Laboratory Supervisor or by a qualified trainer under direct supervision. You will learn how to set up and operate machinery, such as the AutoVac 230 and 360, the gas powered solution pumps, and shop vacuums.
  • Racker - Cuba
    Perform noncomplex rack and unrack operations in accordance with instructions given by the Chem Processing Supervisor/Chem Processing Lead or by a qualified trainer, under direct supervision.
  • Customer Service Representative - Cuba, MO
    Established Missouri based company in the Cuba area is setting up interviews for a customer service/ front desk position. We are looking for a team member with a great personality. Monday-Friday with cell phone provided for any occasional necessary night and weekend calls. This is a one-person office so you must be self motivated and determined. Prior interviewing experience a plus. Job duties include: - heavy phones - multi tasking - light excel spreadsheet/ data entry - interviews - client care and follow up But above all personality is key!
  • Production - Sullivan, MO
    Production All Shifts available Learn to set up and operate production equipment by following procedures, retrieve required tools or equipment, moving product in or out of line area as needed, clean up equipment and work area.
  • CNC Operator - Sullivan, MO
    -Complete accurate operation at assigned work cell to include: matching of job packet to job control plans SPC sheets Insert sheet Proper gauging (progressive gauges, micrometers, and calipers) Proper machine guarding -Works from prints or drawings to produce a variety of precision items -Setup machines under the direction of the CNC Setup Operator -Follows lockout-tagout procedures when machines must be shut down for repair, as well as following all safety rules regarding machine operation and proper guarding
  • Machine Operator
    Positions available in Sullivan, MO for several hard working dependable people. Skills needed include: Able to read and legibly write English and follow verbal or written directions. Able to use basic arithmetic skills, able to function with a high degree of manual dexterity to assemble or repair precision equipment.
  • Assembler - Sullivan, MO
    This position is responsible for assembling finished products using sub-assemblies, parts, and fasteners and to pack as designated to customer specification sheet and company policies. Complete accurate operation at assigned work cell to include: the ability of running hydraulic press, and proper machine guarding. Review work instructions and customer specification to determine required assembly, finish, and any special options.Maintains clean and safe working environment in line with company policies. Assumes additional duties as directed by supervisor.
  • Shipping/Receiving - Sullivan, MO
    Picking and packing, pulling orders, boxing, basic computer knowledge. Must be able to lift from floor to shoulder height. Employee will UPS and Fedex machines to prepare shipments.
  • Changeover Specialist Mechanic - St. Clair
    Pay $15.00 up pending experience Changeover Specialist Mechanic The position of Changeover Specialist Mechanic is responsible to oversee the mechanical changeover operation of the production lines; working to attain safety, high quality and efficiency goals, with minimal down time. This position bears responsibility for change overs and maintenance for the production lines.
  • Changeover Specialist Mechanic - Pacific
    Pay $15.00 up pending experience Changeover Specialist Mechanic The position of Changeover Specialist Mechanic is responsible to oversee the mechanical changeover operation of the production lines; working to attain safety, high quality and efficiency goals, with minimal down time. This position bears responsibility for change overs and maintenance for the production lines.
  • Quality Control Technician - Union, MO
    $12.00/hr to start. Quality Control experience preferred. Must be able to read calipers and micrometers. Must be organized, dependable and able to multitask.
  • Shipping and Receiving - Washington, MO
    Fill and process shipping orders. Contact shipping agents for pick up. Process and fill parcel orders. Load orders on corresponding carries. Assist QC personnel upon receipt of parts. Rotate inventory and assist with assembly and order kitting. Fork truck experience a plus.
  • Trumpf Operator
    For the trumpf operators applicants do not have to have experience operating a trumpf as we will train. Applicants need to be familiar with reading basic 2 dimensional drawings in standard and sometimes in metric. They must be able to read a tape measure. Must be able to lift 40lbs and stand on their feet for 8-9 hours in an atmosphere that isn’t temperature controlled.
  • CNC Operator
    CNC Operator. Must be familiar with reading 2 dimensional and 3 dimensional drawings in both standard and metric. Must be able to read a tape measure and calipers. Must be able to lift 25-30 lbs and stand on their feet for 8-9 hours in an atmosphere that isn’t temperature controlled. Experience with Mazak machines a plus.
  • Shipping/Packaging
    Shipping/Packaging. Hours are 8:30-5. Work in the shipping department and package parts according to size and truck line. Produce shipping labels, packing slips and enter job information into the company computer system. Must be able to work with little supervision. Must be able to lift 30-50lbs and work in the heat. Must be very detail orientated. Forklift Experience a plus.
  • Production - Gerald, MO
    The employee works with other employees to maintain the desired production output. Workers are expected to work in a food safety environment and have a responsibility for the safety and quality of the foods they are producing. NO JEWELRY IS ALLOWED TO BE WORN INCLUDING FACIAL PIERCINGS. Workers must have high manual dexterity, and be able to work quickly and repetitively. Efficiently and timely to produce a high standard of production efficiency. Constantly working on your feet. Physical requirements include lifting up to 60lbs. over your head and at or below your waist, including pushing, bending and twisting.
  • Machine Operator - Union, MO
    $10 /hr to start. This position is primarily responsible for performing all functions to move raw products produced by a specified machine to the final packed product as specified with safety, quality, and quantity goals satisfied by performing the following duties. Operates machinery, assembles parts, trim and clean parts, count label, package and wrap products.
  • Machine Operator Position in Union, MO.
    Pay starts at $10/hr. Machine operator/assembly positions available. We have many positions available for 1st (7:00a-3:30p), 2nd (3:00p-11:30p), and 3rd (11:00p-7:30a) shifts. Monday-Friday 40 hours a week, with possible overtime on weekends.
  • Assembly - St. Peters
    In need of several workers to assemble gift baskets No experience necessary but must be able to stand all day and do repetitive hand movements. Hours: M-Th 8-4:30 F 8-4
  • Packaging/Labeling - O'Fallon, MO
    $12.00 to start this packaging and labeling position in O'Fallon, MO. Monday-Friday 8am-5pm. Steel toed shoes required along with long pants.
  • Cold Warehouse Picker - St. Peters, MO
    $11.50 to start. With this position you will be working in cold warehouse environment/freezer. Must be available to work weekends. 11am till the job is complete, schedule changes per week.
  • Fulfillment Specialist - St. Louis
    Responsible for assembling, measuring, and packaging freshly prepared meals as well as to pick and pull customer orders accurately. To ensure timely product production, shipping and delivery to customers. Cleanliness of workstations and facility, quality of product and working in a safe manner.
  • Production Specialist
    Responsible for assembling, measuring, and packaging freshly prepared meals. Maintaining cleanliness of workstations and facility, quality of product and working in a safe manner.
  • Receptionist - South County
    As a receptionist you will be the first point of contact for the company and you will provide administrative support across the organization. You will handle the flow of people through the business and ensure that all receptionist responsibilities are completed accurately and delivered with high quality and in a timely manner.
  • Food service packers - Jefferson County, MO
    Looking for 6 food service packers. Packing food product at a very fast pace. This position is full time (mandatory overtime on Saturdays) and includes benefits. Must be available for any shift initially but shift will be fixed after training. Pay starts at $12-$15 depending on experience however experience is not required to apply.
  • Plastics Production/Assembly Line - Festus, MO
    Plastics Factory in Festus looking for reliable employees to assist in running the assembly line. Production area is temperature controlled. Must be comfortable standing on your feet for the entire shift.
  • Machine Operator - Fenton
    Plastics factory hiring for all 3 shifts in the Fenton area. Position consists of running multiple machines and is very fast paced. Must have good hand eye coordination and a strong work ethic. Pay starts at $13.50/hr.